Introductions:

• Mobile new born resuscitation table - Fixed height
• Skin, Air, Manual and Pre-Warm control modes
• Microprocessor based controller with highly accurate
•  Thermistor sensors (No Calibration required)
• LCD for alarm messages
• APGAR (Up) and Down Timer
• Ceramic heater with reflector and safety grill
• Patient examination lamp for extra illumination during procedure
• Stainless Steel Baby bed with Baby Mattress (density approx. 21-25 kg/m³) with waterproof, zipped cover
• Continuous variable head up/down facility
• Polycarbonate side panels collapsible/lockable
• X-ray cassette holder tray underneath baby bed
• Facility to attach syringe/infusion pump, shelf to place monitor
• SS multi hook IV stand
• Under table 3 storage drawers (Non-metallic, removable and washable)
• Facility to incorporate Under Surface Phototherapy
• Mounted on 4 swivel castors (100 mm), 2 with brake
• Integrated electrical operated Slow Suction unit
• Facility to mount 2 Nos. - 5/10 Litre Oxygen Cylinder
• Oxygen regulator, Pressure gauge, Flowmeter, Humidifier bottle and Silicone Tubings
• Manual silicon resuscitator to provide Positive pressure with Silicone Face mask
• Silicone Airways

Specification 

Electrical Specification 

• Microprocessor based temperature controller with Pre-warm, Manual and Skin Servo modes
• LED Display of Skin Temp.,Air Temp., Set Temp. (Resolution 0.1°C) & Heater Power %.
• LCD to display modes of operation, Alarm messages, Skin Temperature in ˚F and Timer.
• Thermistor based sensor with Accuracy of +/- 0.2°C (Temp. Calibration not require)
• Modes of Operation: Skin Servo, Air, Manual and Pre-Warm
• Keypad lock facility
• Skin mode: Temperature range: 34 to 38°C , Resolution : 0.1°C
• Air mode: Temperature range: Room temp. to 39°C , Resolution : 0.1°C
• Manual mode: Adjustable Heater Power 0 to 100% (with an increment of 5%), Time duration:15mins
• Pre-warm mode: To pre-warm the cradle before baby is placed on the bed. (No alarm will be activated during Pre-warm mode)
• Adjustable Heater Power 0 to 25% (with an increment of 5%), Time duration:30mins
• Overhead heater box: Swivelling, Consists of Ceramic heater (650 Watts) placed in parabolic re􀃸ector with a safety grill & Halogen
• observation light (12V/50W) for observing the baby
• Operating Voltage: 220-240 VAC, 50Hz
• Power: 800W (Max.)
• Alarm: Audio alarm with 10 minute mute facility & Visual alarms with message on LCD as follows
• Power Fail Alarm: Audio with LED indicator

Mechanical Spefification 

• Fixed height warmer with attached baby cradle mounted on 4" wheel
• Stainless steel baby tray with water proof, zipped cover mattress of density approx. 21-25 kg/m³
• Continuous head up/down facility
• X-Ray cassette holder
• Collapsible/lockable Side Supports made up of Unbreakable polycarbonate material
• Slots for sensor and ventilator tubing
• Side tray for placement of monitor & Under table 3 storage drawers (Non-metallic, removable and washable)
• Stainless steel infusion rod with facility to mount Syringe/infusion pump
• Lower shelf below baby tray to facilitate under surface phototherapy
• Integrated support for 10L Oxygen bottle.
• Oxygen regulator with pressure gauge, 􀃸ow meter and humidi􀃶er bottle along with silicon tubing for delivery of
• oxygen from humidi􀃶er bottle to patient.
• Integrated electrical operated Slow Suction unit with Vacuum Regulator, Vacuum Gauge and autoclavable 􀃸uid jar
• Silicone manual Resuscitator for Infant (250ml) along with face masks size 00 and 01
• Laryngoscope - Penlight handle with straight blade size 0 and 1
• Silicone Airways – size 000, 00, and 0

Dimensions:

• Height : 74.5" (1890 mm), Width : 28.0" (710 mm), Length : 39.0" (990 mm)
• Bed to Floor Height: 37.5" (950 mm)
• Distance between baby bed and heater: 33" (840 mm)
• Mattress size: 30" (762 mm) x 20" (508 mm)
• Height of side panel above baby bed: 5.75" (145 mm)